InkStar Ready Printed DTF Transfers

Dont have a DTF printer? We can supply ready to press printed Direct to Film transfers and shipped Australia Wide. 

How to order a DTF ready to press transfer:

• Maximum print width 270mm wide, length can be 1m or more as we print on a roll of DTF transfer film  
• Vector files must be supplied in a print ready format, the file will be printed as supplied, any manipulations to files, colours and transparence removal will be charged per hour
• NO PNG files please, if you have a png file please email before hand. We only supply DTF printing transfers using vector files either .ai, .cdr or true vector PDF files, a jpeg saved as a pdf is not a vector
• You will need a commercial heat press, an IRON WILL NOT work as DTF prints require heat and high pressure 
• Production time is about 5 working days from order being placed. 
• ALL DTF printing orders must be placed ONLINE only, no pickups permitted.
• Gang sheets of multiple prints and logo is permitted 
• Prints are sold by the meter or A3 length only (width 270mm)
• Press films using a heat press at medium pressure at 150 degrees Centigrade for 10-15 seconds, shorten press time if bleeding occurs. Always perform a test print before actual garment application. In some cases you may require to use a teflon sheet or baking paper for application. 
• Please note that this is a guidance only and we DO NOT advise on how to apply DTF prints, if you feel you are not used to DTF transfers please consider your options before placing your order.

Please note we do not advise on how to apply on different garments, Flash Uniforms accept no liability for whatsoever if after garment application there is bleeding or incorrect application resulting in peeling. Temperatures stated are for cotton garments, temperature and pressure may have to be reduced for polyester.